LEDs are undoubtedly a fantastic modern-day replacement of tube lights and incandescent bulbs. LED lights are both energy efficient and brighter than their predecessors. Also, you can expect a longer life span from LED lights. But there are some downsides to LED lights as well.
According to Electronicshub, flickering light, humming sound are some common problems of LED Lighting. If you want to know what more problems can LED lights cause, then read along
1. LED Light Flickering
One of the most common and frequent problems with LEDs is flickering. In this case, the LED bulbs flickers, sometimes continuously, while sometimes, it happens randomly. The most common reasons behind this are poor capacitors or low wattage.
Sometimes, LEDs are connected with devices like washing machines, dryers, etc., which take up maximum wattage. And this leaves the LED with inadequate wattage leading to flickering. To fix this issue, you need to check the socket. socket is okay, you can replace the bulb or vice versa.
2. LED Buzzing or Humming Noise
Buzzing sound is another common issue with the LED Lighting. It’s usually because of overload in the circuit. If your LED bulb is receiving slightly higher voltage, it’ll produce a humming sound instead of blowing off. When the voltage rises, the electronic parts vibrate, causing the fuming sound.
The best solution is to compare the voltage that runs through your socket with what your bulb or lamp accepts. It’ll most probably solve the problem.
3. Too Bright light
Sometimes LEDs become too bright for your liking. And it can be due to two reasons. The first one is that that the bulb is getting more wattage than required. Secondly, it can happen because you might have got a Kelvin temperature bulb, which can sometimes be too bright.
If your bulb is dimmable, install a switch to control this feature. Or use a fixture that can prevent extra light from reaching your eyes.
4. LED Light Too Dim
A dim LED can be quite irritating. It usually happens either when the LED gets too old or when it’s poorly designed. LEDs have a life span, so before dying out completely, it’s normal to lose brightness. In such a case, you should replace the LED with a new one.
5. LED Light Stopped Working
Sometimes the LEDs stop working altogether. This usually happens because of a short circuit or when the LED has become too old. You can get it checked by an electrician or simply replace it with a new one.
6. LED Flashes on and then Goes off
It happens due to faulty fixture drivers. Sometimes, the voltage supplied to the LED is more than what it requires. And this makes the LED flash and then go off. If you face this issue, it’s better to call a technician.
7. LED Dimming Does not work
There can be several reasons behind this happening. Your bulb may not be dimmable. Or the fixture isn’t meant for dimmable LED bulbs. You can get it checked by an electrician and diagnose the problem. You can buy a new bulb if it wasn’t dimmable or can replace the fixture.
Content created and supplied by: Kwajaffa (via Opera
News )
, . , . () , , , , , , , , . / , and/or . , , and/or , and/or